8
TOLL FREE:
1-800-798-7398
www.ninjakitchen.com
9
English
Locking
Handle
Using the Ninja
™
Pro System 1100
Shaft
BEFORE FIRST USE
1
Remove all packaging material and labels
from the appliance.
2
Wash the lids, pitcher, bowl and
attachments in warm, soapy water with
a soft cloth.
Use caution when washing
the blade assemblies as the blades are
very sharp.
3
Rinse and dry thoroughly.
4
The pitcher, bowl, lids and
attachments are all dishwasher safe.
It is recommended that the lids and
attachments go on the top rack. Ensure
that the attachments are removed from
the containers before placing in the
dishwasher.
5
The motor base can be wiped clean with
a damp cloth.
HOW TO ASSEMBLE
CAUTION:
Make sure that the motor base
is unplugged from the power source.
1
Place the motor base on a clean, dry,
level surface.
2
Lower the pitcher or the bowl onto the
motor base. (
Fig. 1
)
3
Rotate the container to the left as far as
it will go. As the container rotates, it will
lower and the safety tabs on the bottom
of the container will slide under the
safety tabs on the top of the motor base.
(
Fig. 2
)
4
The pitcher or bowl can be placed on the
motor base two ways; the handle can be
on the front right corner or the front left
corner. (
Fig. 3a, Fig. 3b
)
5
Place either the 6-Blade assembly or the
whipping attachment into the pitcher.
(
Fig. 4a
) Place either the 4-Blade
assembly, dough blade or dough paddle
into the bowl. (
Fig. 4b
) Holding the
attachment by the shaft, place it onto the
gear shaft inside the container. Ensure
that the attachment fits snuggly around
the gear shaft and that it is standing
straight.
CAUTION:
Blades are sharp! Use extreme
caution when handling the blade
assemblies. Always hold them by the
shaft.
HOW TO USE
IMPORTANT:
DO NOT
attempt to
operate the appliance without the lid on.
1
Place the pitcher or bowl onto the motor
base and insert the desired attachment.
(See 'HOW TO ASSEMBLE'.)
2
Add the ingredients to the container.
Make sure your total of ingredients
don't go higher than the highest
measured marking line on the side of the
containers.
IMPORTANT:
Never add ingredients
into the container before placing the
attachment in first.
3
Place the corresponding lid onto the
container with the locking handle in the
upright position and the pouring spout
on the corner opposite the container’s
handle. Align the arrows ( ) located on
the lid and container’s handle. Ensure
that the lid is completely seated and
press the lid down into the container.
Press the locking handle down so that
the latches on the lid fit under the tabs
on the container. (
Fig. 5
)
NOTE:
If you need to add additional
ingredients while the appliance is
processing, open the pouring spout cap
and pour the ingredients in through the
opening.
4
Plug the power cord into the electrical
outlet and press on the power button ( ).
NOTE:
As a safety feature, the power
button ( ) will flash and the motor will
not work if the container and lid are
not
installed correctly. When the container
and lid are installed properly, the power
button ( ) will be solid, indicating that
the appliance is ready for use.
5
Select the button that best suites your
needs.
* See ‘Speed Settings & Uses’ chart.
Fig. 1
Fig. 2
Fig. 4a
Fig. 3a
Fig. 3b
Fig. 4b
Shaft
Fig. 5
NJ602W_30_IB_ENG_100426.indd 8-9
10-05-03 11:38 AM
