8
www.ninjakitchen.com
Assembly and Use for the Pitcher
IMPORTANT:
Make sure that the motor base
is plugged in for use.
1
Place the motor base on a clean, dry, level
surface such as a counter or table top.
2
Align and lower the Pitcher onto the motor
base. (
Fig. 1
) Handle should be aligned slightly
to the right of the “
LOCK
” symbol on the
motor base.
3
Rotate the pitcher clockwise as far as it will go
to lock in place. (
Fig. 2
)
4
The pitcher can be placed on the motor base
two ways; the handle can be on the front right
corner or the front left corner.
(
Fig. 3a, Fig. 3b
)
5
Holding the 6-Blade Assembly by the top of the
shaft, place it onto the drive gear inside the
pitcher. Ensure that the attachment is seated
properly and is standing upright. (
Fig. 4
)
NOTE
: The blade will fit loosely on the drive
gear.
6
Add the ingredients to the pitcher, making sure
that they do not exceed the highest measured
marking line on the side of the pitcher.
NOTE
: If you need to add additional ingredients
while the appliance is processing, open the
pour spout cap and pour the ingredients in
through the opening.
7
Plug the power cord into the electrical outlet
and press the power button ( ).
NOTE: As a safety feature, the power
button ( ) will flash and the motor will not
work if the pitcher and lid are not installed
correctly. When the pitcher and lid are
installed properly, the power button ( )
will be solid, indicating that the appliance
is ready for use.
8
Holding the lid by the handle in the upright
position, place it on top of the pitcher aligning
the arrow ( ) located on the lid with the arrow
( ) located on the pitcher’s handle. (
Fig. 5
)
Press the handle down until you hear a click.
Assembly
Fig. 3b
Fig. 2
Fig. 1
Fig. 4
Fig. 5
Fig. 3a
BL771_30_BL771C_30_IB_ENG_121206_6.indd 8
12-12-06 11:23 AM
All manuals and user guides at all-guides.com
