11
TOLL FREE:
1-877-646-5288
Assembly and Use for the Bowl
ASSEMBLY
WARNING:
Never leave the appliance unattended while in use.
Fig. 1
Fig. 2
ASSEMBLY
Fig. 3a
Fig. 3b
IMPORTANT:
Make sure that the motor base is
plugged in for use.
1
Place the motor base on a clean, dry, level surface
such as a counter or table top.
2
Align and lower the Bowl onto the motor base.
(
Fig. 1
) Handle should be aligned slightly to the
right of the “
LOCK
” symbol on the motor base.
3
Rotate the bowl clockwise as far as it will go to
lock in place. (
Fig. 2
)
4
The bowl can be placed on the motor base two
ways; the handle can be on the front right corner or
the front left corner. (
Fig. 3a, Fig. 3b
)
5
Holding the desired blade by the top of the shaft,
place it onto the drive gear inside the bowl. Ensure
that the attachment is seated properly and is
standing upright. (
Fig. 4
)
NOTE
: The blade will fit loosely on the drive gear.
6
Add the ingredients to the bowl, making sure that
they do not exceed the highest measured marking
line on the side of the bowl.
7
Plug the power cord into the electrical outlet and
press the power button ( ).
NOTE: As a safety feature, the power button
( ) will flash and the motor will not work if
the bowl and lid are not installed correctly.
When the bowl and lid are installed properly,
the power button ( ) will be solid, indicating
that the appliance is ready for use.
8
Holding the lid by the handle in the upright
position, place it on top of the bowl aligning the
arrow ( ) located on the lid with the arrow
( ) located on the bowl’s handle. (
Fig. 5
) Press the
handle down until you hear a click.
NOTE: The 64 oz. bowl is not intended for
blending drinks. Do not overfill.
NOTE:
To add liquids during
processing, open the drizzle
hole on the top of the lid and
pour the liquid slowly into the
mixture.
Fig. 4
Fig. 5
BL771_30_BL771C_30_IB_ENG_121206_6.indd 11
12-12-06 11:23 AM
All manuals and user guides at all-guides.com
