9
ninjakitchen.com
ASSEMBLY & USE OF THE PITCHER
8
ninjakitchen.com
BEFORE FIRST USE
Shaft
Fig. 1
Fig. 2
WARNING: DO NOT immerse the Master
Pod into water or any other liquid�
1
Remove all packaging material and
labels from the appliance. Separate/
remove all parts from each other.
2
Wash the splashguards, bowl, pitcher,
and upper/lower blade assemblies in
warm, soapy water. When washing the
blade assemblies use a dish-washing
utensil with a handle to avoid direct
hand contact with blades.
WARNING: Handle the upper and
lower blade assemblies with care
when washing, as the blades are sharp�
3
Handle the upper and lower blade
assemblies with care to avoid contact
with sharp edges. Rinse and air dry
thoroughly.
4
The pitcher, bowl, splashguards, and
upper/lower blade assemblies are all
dishwasher safe. It is recommended
that the spashguards and blade
assemblies be placed on the top rack.
Ensure that the blade assemblies are
removed from the pitcher and the bowl
before placing in the dishwasher.
5
Wipe the motor base clean with a
damp cloth.
1
Review warning and caution statements
above before proceeding to number 2.
2
Place the pitcher on a clean, dry, level
surface.
3
Holding the Lower Pitcher Blade
Assembly by the shaft, place it onto the
spindle pin inside the pitcher.
(Fig� 1)
4
Holding the Upper Pitcher Blade
Assembly carefully by the shaft, insert
the Upper Pitcher Blade Assembly
over the Lower Pitcher Blade Assembly
rotating it until it locks onto the Lower
Pitcher Blade Assembly.
(fig� 2)
5
Add the ingredients to be processed
into the pitcher.
IMPORTANT: Always assemble
the upper and lower Pitcher Blade
Assembly inside the pitcher�
WARNING: DO NOT try to place
the upper and lower Pitcher Blade
Assembly onto the Master Pod and
then into the Master Prep
®
pitcher�
IMPORTANT:
Never add ingredients
into the pitcher before placing the
blades in first.
WARNING: Handle the Upper and Lower Pitcher Blade Assemblies with care, as the
blades are sharp�
WARNING: Remove utensils prior to processing� Failure to remove may cause the
pitcher to be damaged or to shatter, which may cause personal injury�
WARNING: DO NOT try to place the Blade Assemblies onto the Master Pod and
then into the pitcher�
WARNING: DO NOT attempt to operate the appliance without the safety
splashguard in place�
WARNING: Never leave the appliance unattended while in use�
CAUTION: DO NOT blend hot liquids, doing so may cause excessive pressure
buildup, resulting in risk of the user being burned�
IMPORTANT: Make sure that the Master Pod is plugged in for use�
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING
THE APPLIANCE:
IMPORTANT: Make sure that the Master
Pod is plugged in for use�
IMPORTANT: Never add ingredients
into the pitcher or chopping bowl
before placing the Upper and Lower
Blade Assemblies in first�
IMPORTANT: Attachments are not
interchangeable�
IMPORTANT: DO NOT attempt to
operate the appliance without the
splashguard on�
IMPORTANT: Never run the
appliance empty�
IMPORTANT: Appliance accessories
are not intended to be used in the
microwave as it may result in damage
to the accessories�
WARNING:
Upper and Lower
Blade Assemblies
are sharp and not
locked in place�
Make sure to
carefully remove
the splashguard and Blade Assembly,
holding it by the shaft� Replace the
splashguard before emptying contents
of the pitcher� Failure to do so will result
in a risk of laceration�
WARNING: Upper and
Lower Blade Assemblies
are sharp and not locked
in place� If using the pour
spout, ensure that the
splashguard is fully on the
pitcher� Failure to do so
will result in a risk of laceration�
