7
Fig. 3
6
To start the appliance, plug the power
cord into the electrical outlet, securely
hold power head while operating and
press on the On/Off pulse button located
on the top of the power head. (
Fig. 3
)
7
Hold the pitcher firmly while depressing
the On/Off pulse button to ensure the
unit stays in place.
NOTE:
DO NOT
operate the appliance
continuously for more than 15 seconds at
a time.
8
To stop the appliance, remove your
fingers from the On/Off pulse button.
9
In order to obtain a better quality of
chopping, operate the appliance by using
the “pulse” method.
10
Make sure that the blades have stopped
completely before removing the power
head.
11
If the ingredients stick to the side of the
pitcher, stop the appliance, remove the
power head and the splash guard. Use a
spatula to dislodge the pieces and then
replace the splash guard and the power
head. Continue processing.
12
Depending on the consistency of the
contents, use the pouring spout to empty
liquid contents.
13
For thicker consistencies, first remove
splash guard and blade (by its shaft),
then empty contents of the pitcher.
HINTS & TIPS FOR USING YOUR NINJA
™
MASTER PREP
™
ADVANTAGE
• The chopping blades can be used for
chopping meat, fish, vegetables, cheese etc.
• For mincing, chopping and pureeing,
increase the length of pulses.
• For coarse chopping, use short, quick
pulses and monitor food texture.
• Pre-cut larger pieces to make them fit
into the
Master Prep
™
Advantage
. When
chopping hard foods (e.g. meat, cheese) cut
into 1-inch cubes.
• To crush ice into snow, start by using short
pulses to break up large chunks. Continue
until snow is achieved.
Using the Master Prep
™
Advantage Pitcher - cont’d
QB800NZ_30_IB_120626_3.indd 7
12-06-26 12:59 PM
