18
19
ninjakitchen.com
Volume
2 oz.
4 oz.
6 oz.
8 oz.
10 oz.
12 oz.
14 oz.
16 oz.
18 oz.
20 oz.
22 oz.
24 oz.
28 oz.
32 oz.
40 oz.
50 oz.
60 oz.
DISPENSING HOT WATER
The Ninja DualBrew Pro System has
a separate water line completely
independent of the line used for brewing
coffee. This ensures you get clean
water every time with no coffee cross-
contamination.
1
To switch to Hot Water Mode, turn the
dial on the left side of the brewer to the
water droplet icon. You should notice
a change on the control panel.
2
Use the Multi-Serve Dial to choose one
of 17 sizes between 2 oz. and 60 oz.
3
Press Water Temp to adjust the
temperature of the water from BOIL
to HOT.
4
Press START BREW on the dial to start
the brew.
WARNING:
To avoid contact with steam
and hot surfaces.
DO NOT
reach across
top of brewer to froth.
1-877-646-5288
WATER TEMP
EXAMPLES OF USES
Boil
Instant Oatmeal,
Instant Mac & Cheese,
Instant Soup,
Tea
Hot
Hot Cocoa, Hot Water
and Lemon
INTEGRATED FROTHER
The Integrated Frother does not heat milk.
1
Add milk to your cup until it is about
1
/
3
full.
• For cold froth, go to Step 2.
• For hot froth, microwave for
45–60 seconds.
2
Swing the arm of the frother toward the
front of the brewer. Install the frother
whisk by twisting it to the right.
3
Hold the cup under the frother and
submerge the whisk just below the
surface of the milk. Press and hold the
button on top of the frother and froth
for 30–45 seconds.
Not all functions are available
on all models.
NOTE:
Frother does not heat liquid.
4
Remove the frother whisk by twisting
it to the left. Keep your cup below the
whisk while you carry it to your sink or
dishwasher for easy cleaning.
NOTE:
The water will cool down once
dispensed into vessel.
FOR HOT FROTH
NOTE:
When dispensing hot water,
use a vessel that is suitable for high
temperatures.
NOTE:
If the display is flashing the water
droplet icon, make sure the dial is turned
completely to one side.
USING THE NINJA® DUALBREW PRO COFFEE
SYSTEM – CONT.