4
5
ninjakitchen.eu
Read all instructions before using your
NINJA
SMART SCREEN KITCHEN SYSTEM WITH FRESHVAC™ TECHNOLOGY
When using electrical appliances, basic safety precautions should always
be followed, including the following:
WARNING
To reduce the risk of fire, electric
shock, serious injury, death, or
damage when using this appliance,
follow these basic safety precautions.
GENERAL PRECAUTIONS
31
Keep hands and utensils out of
containers while chopping and
blending to reduce the risk of
severe personal injury or damage
to the blender/food chopper.
A scraper may be used
ONLY
when the blender or processor
is not running. When using the
processor, always use food pusher
to add food.
NEVER
add food by
hand.
32
NEVER
operate the appliance
without lids and caps in place.
DONOT
attempt to defeat the
interlock mechanism. Ensure the
container and lid are properly
installed before operation.
33
DONOT
expose the containers
and accessories to extreme
temperature changes. They may
experience damage.
34
NEVER
leave the appliance
unattended while in use.
35
DONOT
open lid or pour spout
cap while blender is operating.
36
DONOT
blend hot liquids. Doing
so may result in pressure buildup
and steam exposure that can pose
a risk of the user being burned.
37
If you find unmixed ingredients
sticking to the sides of the pitcher,
stop the appliance, remove the
lid, and use a scraper to dislodge
ingredients.
NEVER
insert your
hands into the pitcher, as you may
contact one of the blades and
experience a laceration.
38
DONOT
attempt to remove the
container and lids from the motor
base while the blade assembly is
still spinning. Allow the appliance
to come to a complete stop before
removing lid and container.
39
Upon completion of blending
or processing, ensure the blade
assembly is removed
BEFORE
emptying container’s contents.
Remove the blade assembly by
carefully grasping the top of
the shaft and lifting it from the
container. Failure to remove the
blade assembly before emptying
the container results in a risk
of laceration.
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
40
Remove the Pro Extractor Blades
®
Assembly from the Single-Serve
Cup upon completion of blending.
DONOT
store ingredients before
or after blending them in the cup
with the blade assembly attached.
Some foods may contain active
ingredients or release gases that
will expand if left in a sealed
container, resulting in excessive
pressure buildup that can pose
a risk of injury. For ingredient
storage in the cup, use only
Spout Lid to cover.
41
If the appliance overheats, a
thermal switch will activate and
temporarily disable the motor. To
reset, unplug the appliance and
allow it to cool for approximately
30 minutes before using again.
42
The maximum wattage rating for
this appliance is based on the
configuration of the Pro Extractor
Blades Assembly and Single-Serve
Cup. Other configurations may
draw less power or current.
43
DONOT
process dry ingredients
without adding liquid to the Single-
Serve Cup. The Single-Serve Cup is
not intended for dry blending.
44
DONOT
submerge the motor
base or touchscreen in water or
other liquids.
DONOT
spray the motor base or
touchscreen with any liquids. Turn
off and unplug the motor base
before cleaning.
45
DONOT
incinerate this appliance
even if it i severely damaged. The
batteries can explode in a fire.
46
Use certified AA size battery, follow
instruction to insert batteries with
correct polarity, Please remove
batteries if appliance is to be stored
unused for a long time.
47
DONOT
charge non-rechargeable
batteries. Do not mix different
type batteries, or new and used
batteries. Supply terminals are not
to be short-circuited. Exhausted
batteries need to be removed and
safely disposed of.
SAVE THESE INSTRUCTIONS
