Ninja CB352SM, Руководство пользователя

Страница: 17 / 76

17
SG ninjakitchen.sg | MY ninjakitchen.my
1 Plug in motor base and place on a clean,
dry, level surface such as a countertop
or table.
2
Add liquid then ingredients to the
Power Nutri Cup. DO NOT add
ingredients past the
MAX LIQUID
line.
3 Place the Hybrid Edge Blades Assembly
on the top of the cup and turn clockwise
to seal.
4
Turn the cup upside down and install on
the motor base by aligning the tab on
the cup with the slots on the base. Then,
rotate cup clockwise until it clicks. Once
locked in place, press the Power button
to turn unit on. The available program
buttons will illuminate and the unit will
be ready for use.
IMPORTANT:
Review all warnings on
pages 4–6 before proceeding.
NOTE:
Auto-iQ programs have pauses and
changes in speed throughout the cycle.
5a
If using an Auto-iQ program, use the
dial to select the program that best
suits your desired output, then press
START/STOP. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press START/STOP.
5b
For Manual mode, press IQ/MANUAL.
With speed 10 on the display, press
START/STOP. Once the ingredients have
reached your desired consistency, press
START/STOP and wait for the unit to
come to a complete stop.
NOTE:
If the unit is plugged in and powered
on, but the cup and blade assembly is not
properly installed, the timer will display “- -”
and the motor will be disabled.
NOTE:
Only speed 10 is available when
using the Power Nutri Cup.
USING THE POWER NUTRI CUP*
ENGLISH