11
SG
ninjakitchen.sg |
MY
ninjakitchen.my
10
SG
+65 800 120 5111 |
MY
+60 1800 803 915
6a
Plug in the unit, then press the Power
button to turn it on. If using an
Auto-iQ program, first select the
program that best suits your recipe.
The preset feature will automatically
stop the unit at the end of the program.
To stop the unit at any time, press the
currently active program again.
6b
If not using an Auto-iQ program, select
one of the manual programs. Once the
ingredients have reached your desired
consistency, press the active button
again, and wait for the unit to come to a
complete stop.
7
When finished, press the button on the
feed chute lid near the handle to unlock,
then turn the lid anti-clockwise. Lift
the lid from the bowl. Always remove
the Chopping Blade Assembly before
emptying the ingredients from the
bowl. To remove the Chopping Blade
Assembly, carefully grasp it by the top
of the shaft and lift it out of the bowl.
8
To remove the bowl from the motor
base, turn the bowl anti-clockwise and
then lift it.
9
Press the Power button to turn the unit
off, then unplug the unit. Refer to the
Care & Maintenance section for cleaning
and storage instructions.
USING THE SLICING/GRATING DISC
IMPORTANT:
Use the SLICE or LOW
setting when using the Slicing/
Grating Disc.
4
Use the finger holes to grasp the disc and
place it over the spindle.
3
Place the disc spindle onto the drive
gear inside the bowl.
5
Place the feed chute lid on the bowl and
turn clockwise until you hear a click,
indicating the lid is locked in place.
NOTE:
The feed chute lid features
a pusher to guide food through the
chute.
NOTE:
The Slicing/Grating Disc
is reversible. Use the side labeled
“Slicer” for slicing. Carefully flip
the disc over to the side labeled
“Shredder” for grating.
1
Place motor base and place on a clean,
dry, level surface such as a worktop
or table.
2
Lower the Food Processor Bowl onto
the motor base and rotate clockwise
until it clicks into place.
IMPORTANT:
Review all warnings on
pages 4–6 before proceeding.
USING THE FOOD PROCESSOR BOWL - CON’T
