Ninja BL770NZ, Руководство пользователя

Страница: 12 / 20

11 AUST: 1800 890 840 NZ: 0800 002 999
Fig. 1
Fig. 2
Assembly and Use for the 1.8L Bowl
ASSEMBLY
Fig. 3a
Fig. 3b
IMPORTANT: Make sure that the motor base is
plugged in for use.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Align and lower the Bowl onto the motor base. ( Fig.
1
) Handle should be aligned slightly to the right of the
“ LOCK ” symbol on the motor base.
3
Rotate the bowl clockwise as far as it will go to lock in
place. ( Fig. 2 )
4 The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (
Fig. 3a, Fig. 3b
)
5
Holding the desired blade by the top of the shaft, place
it onto the drive gear inside the bowl. Ensure that the
attachment is seated properly and is standing upright.
(
Fig. 4
)
NOTE:
The blade will fit loosely on the drive gear.
6 Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
7 Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power button ( )
will flash and the motor will not work if the bowl
and lid are not installed correctly. When the bowl
and lid are installed properly, the power button (
) will be solid, indicating that the appliance is
ready for use.
8 Holding the lid by the handle in the upright position,
place it on top of the bowl aligning the arrow
( ) located on the lid with the arrow ( ) located on the
bowl’s handle. (
Fig. 5
) Press the handle down until you
hear a click.
NOTE: The 1.8L bowl is not intended for blending
drinks. Do not overfill.
NOTE: To add liquids during blending, open the drizzle
hole on the top of the lid and pour
the liquid slowly into the mixture.
NOTE:
Do not exceed the highest
measured marking line on the
side of the bowl. For meats do not
exceed 1 L bowl mark.
Fig. 4
Fig. 5