Ninja BL688 Series, Руководство пользователя

Страница: 11 / 32

E
n
gl
is
h
10 www.ninjakitchen.com
1 Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3 Align and lower the Pitcher onto the motor base.
(Fig. 1)
Handle should be aligned slightly to the right of
the “ LOCK ” symbol on the motor base.
4 Rotate the pitcher clockwise until it clicks in place. As
the pitcher rotates, it will lower and the safety tabs on
the bottom of the pitcher will slide under the safety tabs
on the top of the motor base.
(Fig. 2)
5
The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner.
(Fig. 3a, Fig. 3b)
6 Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright.
(Fig. 4)
NOTE:
The Stacked Blade Assembly will fit loosely on
the drive gear.
7 Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“MAX” liquid mark (64 oz.) on the pitcher.
8 Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power light
( ) will flash and the motor will not work if the
Pitcher and lid are not installed correctly. When
the Pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.
9 Holding the lid by the handle in the upright position,
place it on top of the pitcher aligning the triangle
( ) located on the lid with the triangle ( ) located on
the pitcher’s handle.
(Fig. 5a)
Press the handle down
until you hear a click. The triangles on the lid and
the pitcher handle
MUST
be aligned in order for the
blender to turn on.
(Fig. 5b)
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
Assembly and Use of the Pitcher
ASSEMBLY
It’s best to add the liquid ingredients first and then the dry ingredients.
Fig. 4
Fig. 3a
Fig. 3b
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH MED LOW
AUTO
AUTO
AUTO
OR
Fig. 5a
Fig. 5b
Fig. 1 Fig. 2
HIGH PULSE
LOW
DOUGH
SMOOTHIE
SINGLE
SERVE
PUREE
FROZEN
BLENDING
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH MED LOW
AUTO
AUTO
AUTO