Ninja BL642NZ, Руководство пользователя

Страница: 6 / 9

9 10 CUSTOMER CARE - AU: 1800 890 840 CUSTOMER CARE - NZ: 0800 002 999
Assembly and Use for the Ninja
®
Blender - cont.
Assembly and Use for the Nutri Ninja
™
Cups
AUTO
Fig. 8
USE REMOVAL
Fig. 6
Fig. 9
Fig. 7
Fig. 10
Fig. 11
AUTO
ASSEMBLY USE REMOVAL
NOTE:
Nutri Ninja ™ | Ninja ® Blender Duo with Auto-iQ ™
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base.
(Fig. 1)
1 Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
2 Add ingredients to the Nutri Ninja
™
cup.
3 Place the Pro Extractor Blades
™
onto the cup and tightly
screw it on clockwise until you have a good seal.
(Fig. 2)
4
Turn the Nutri Ninja ™ cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Rotate the Nutri Ninja
™
cup clockwise
until it locks in place, you will hear a click when the
lock is engaged.
(Fig. 3)
5 Press the power button on, and select the speed
or Auto-iQ ™ program that suits your needs.
(Fig. 4) The Auto-iQ
™
program will stop the appliance
automatically at the end of the program.
6
To pause the appliance, press the selected speed or
Auto-iQ
™
program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6
7
Once you have reached your desired consistency, stop
the appliance by pressing the power button and wait
for the blade to stop turning. Turn the Nutri Ninja
™
cup
anticlockwise and pull straight up to remove.
(Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “MAX” fill line.
8 Turn the cup upright and remove the Pro Extractor
Blades
™
by twisting the Pro Extractor Blades
™
anticlockwise.
9 Place the Sip & Seal
™
lid onto the Nutri Ninja
™
cup,
twist to seal and enjoy!
10 Make sure that the motor base is unplugged when
not in use.
11 To release the motor base
from the counter or table top,
place your hands underneath
both sides of the motor base
and gently pull the unit up and
towards you.
(Fig. 7)
Fig. 1
Fig. 7
WARNING: Never leave the appliance unattended while in use.
CAUTION: Blade assemblies are sharp, not locked in place and removable, handle with care. When
handling the blade assemblies, always hold them by the shaft.
IMPORTANT: Make sure that the motor base is plugged in for use.
WARNING: Never leave the appliance unattended
while in use.
NOTE:
Nutri Ninja ™ | Ninja ® Blender Duo with Auto-iQ ™
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base.
(Fig. 6)
9
Press the power button to turn on the unit. Select
the speed or Auto-iQ
™
program that best suits your
needs. The Auto-iQ
™
program will stop the appliance
automatically at the end of the program.
(Fig. 7)
NOTE: Pulse ingredients for even chopping by
holding the Auto-iQ ™ Pulse button until your desired
consistency is reached.
NOTE: Max PULSE iteration is 30 Pulses. After 30
Pulses allow 10 minutes to pass before running the
PULSE function up to an additional 30 Pulses.
10 To pause the appliance, press the selected speed or
Auto-iQ
™
program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
11 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning.
(Fig. 8)
12
Turn the pitcher anticlockwise to remove and then lift
off the base. (Fig. 9)
CAUTION: Never insert your hands in the
pitcher as the blades are sharp. Always use a
spatula to dislodge food that has stuck to the
sides of the pitcher.
CAUTION: The blades are not locked in place. If
using the pour spout, ensure that the lid is fully
locked onto the blender pitcher.
CAUTION: If pouring with the lid removed, ALWAYS
remove the blade assembly first before pouring.
13 Depending on the consistency of the contents in the
container, open the pour spout cap and use the spout
to empty liquid contents.
14
For thicker consistencies, remove the lid and blade
attachment carefully (by its shaft), then empty contents
from the container. To remove the lid, press the release
button on the lid and pull the lid handle up to a 90
°
angle and lift the lid off the blender pitcher. (Fig. 10)
15
Make sure that the unit is unplugged when not in use.
16
To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you.
(Fig. 11)