10
11
ninjakitchen.com
6
Holding the Stacked Blade Assembly
by the top of the shaft, place it onto
the drive gear inside the pitcher. Ensure
that the Stacked Blade Assembly is
seated properly and is standing upright.
7
Add the ingredients to the pitcher,
making sure that they do not exceed the
highest measured marking line on the
side of the pitcher. side of the pitcher.
8
Holding the lid by the handle in the
upright position, place it on top of the
Pitcher aligning the triangle ( ) located
on the lid with the triangle ( ) located
on the Pitcher’s handle. Press the
handle down until you hear a click. The
triangles on the lid and the Processor
Bowl handle MUST be aligned in order
for the blender to turn on.
9
Plug the power cord into the electrical
outlet and press the power button ( ).
11
ninjakitchen.com
BEFORE FIRST USE
IMPORTANT:
Review all warnings on
pages 4–7 before proceeding.
DID YOU KNOW?
• You can take your drinks on the go using
the spout lid.
• The cup, lid, and blade assembly are BPA
free and dishwasher safe.
NOTE:
Handle the Pro Extractor Blades
™
Assembly by grasping around the
perimeter of the blade assembly base.
NOTE:
The Stacked Blade Assembly
will fit loosely on the drive gear.
NOTE:
If you need to add additional
ingredients while the appliance is
processing, open the pour spout cap
and pour the ingredients in through the
opening.
1
Remove all packaging material and
labels from the appliance. Separate/
remove all parts from each other.
2
Wash the lids, pitcher, food processor
bowl, Nutri Ninja® cups and Blade
Assemblies in warm, soapy water.
When washing the blade assemblies,
use a dish-washing utensil with a
handle to avoid direct hand contact
with blades.
3
Handle blade assemblies with care to
avoid contact with sharp edges. Rinse
and air dry thoroughly.
4
The pitcher, food processor bowl,
Nutri Ninja cups, lids, and Blade
Assemblies, are all dishwasher safe. It is
recommended that the lids and blade
assemblies be placed on the top rack.
Ensure that the blade assemblies are
removed from the containers before
placing in the dishwasher.
5
Wipe the motor base clean with a
damp cloth.
NOTE:
All attachments are dishwasher
safe. It is recommended that the cup,
lid, and blade assembly be placed
on the top rack of the dishwasher.
Ensure blade assembly and lid are
removed from the cup before placing
in the dishwasher. Exercise care when
handling blade assembly.
ASSEMBLY
1
Place the motor base on a clean, dry,
level surface such as a counter or table
top. Press down on the motor base to
make sure that the Suction Cups adhere
to the counter or table top.
3
Align and lower the Pitcher onto the
motor base Handle should be aligned
slightly to the right of the “
LOCK
”
symbol on the motor base.
4
Rotate the pitcher clockwise until it clicks
in place. As the pitcher rotates, it will
lower and the safety tabs on the bottom
of the pitcher will slide under the safety
tabs on the top of the motor base.
5
The pitcher can be placed on the motor
base two ways; the handle can be on the
front right corner or the front left corner.
ASSEMBLY & USE OF THE PITCHER
HIGH
PULSE
LOW
DOUGH
SMOOTHIE
SINGLE
SERVE
PUREE
FROZEN
BLENDING
ENGLISH
