9
1-877-646-5288
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Handle the blade assemblies with care,
as the blades are very sharp.
1
Separate/remove all parts from each other.
2
Clean the motor base with a damp cloth and wipe dry.
3
Place the Blender Pitcher in the dishwasher. Place the
lid and blade assembly on the top rack.
OR
4
Carefully hand wash the lid, pitcher and blade assembly
in warm, soapy water with a soft cloth.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
1
Store the Ninja
®
Professional Blender upright with the
Pitcher on the motor base, 6-Blade assembly inside the
Pitcher and lid on the Pitcher. Do not place anything on top.
2
Tuck the power cord in the cord storage compartment
in the back of the unit.
RESETTING THE MOTOR THERMOSTAT
The Ninja
®
Professional Blender features a unique safety
system which prevents damage to the unit’s motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minutes.
To reset the appliance, follow the resetting
procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the cutting blades or attachments.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
Troubleshooting Guide
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website:
www.ninjakitchen.com
or feel free to contact customer service:
1-877-646-5288
.
PROBLEMS
POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or
Attachment Doesn’t Rotate.
Make sure the pitcher is securely placed on motor base.
Make sure the lid is securely on the pitcher in the correct position (align arrows).
The appliance is turned “Off”. Turn the knob to “Pulse” or “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overheated. Unplug and wait approximately 15 minutes before using again.
Make sure that the ready light is a solid green and that the appliance is correctly
assembled.
You Cannot Achieve Snow
From Solid Ice.
Do not use ice that has been sitting out or has started to melt. Use ice straight from
the freezer.
