10
www.sharkninjamanuals.com
Assembly and Use for the Shredding/Slicing and Grating Discs
Fig. 12
Fig. 14
Fig. 15
On/Off
Switch
IMPORTANT:
Never feed food by hand. Always use the
food pusher to add food through the feeder tube on the
fully assembled unit.
IMPORTANT:
Avoid contacting moving parts.
1
Place the motor base on a clean, dry, level surface such
as a counter or table top.
2
Align and lower the bowl onto the motor base. Handle
should be aligned slightly to the left of the “
LOCK
”
symbol on the motor base.
3
Rotate the container to the left as far as it will go to lock
in place.
4
Insert the spindle into the bowl.
(Fig. 12)
5
Hold the disc by the plastic hub and carefully place
the shredding/slicing disc or the grating disc onto the
spindle.
(Fig. 13)
CAUTION:
Shredding/Slicing Disc and Grating Disc are sharp! Handle with care. Make sure that the appliance
is unplugged from the power source before inserting or removing the shredding/slicing or grating disc and
before cleaning.
Fig. 13
Or
6
Holding the lid by the feeder tube, place it on top of the
bowl aligning the on/off switch with the bowl’s handle.
(Fig. 14)
7
Place food into the feeder tube. Using the food pusher,
add food through the feeder tube. Push the on/off
switch forward to the “On” position.
(Fig. 15)
8
When you have finished slicing, shredding or grating,
release the on/off switch to turn the appliance off. Wait
for the disc to stop turning and then remove the lid.
9
Hold the disc by the hub to remove and then remove the
spindle. Empty the food from the bowl.
10
The spindle, shredding/slicing disc, grating disc, lid and
food pusher are all top rack dishwasher safe.
CAUTION: SHREDDING/SLICING DISC AND
GRATING DISC ARE SHARP! HANDLE CAREFULLY
WHEN CLEANING.
