Excluding H / L value
Low-battery Alert
The low-battery symbol is displayed if the power voltage is
lower than 2.6V±0.15V
Automatic Power-off
The thermometer automatically powers off if it is not used
in 60±2 seconds.
Dimensions(mm)
149x95x45mm
Weight (g)
108g (without batteries)
Operating Environment
Temperature
：
10
℃
~40
℃
(50
℉
~104
℉
)
Humidity
：
Rh≤85% non-condensing
Atmospheric pressure
：
70kPa~106kPa
Storage and Transportation
Temperature
：
-20
℃
~55
℃
(-4
℉
~131
℉
)
Humidity
：
Rh≤93% non-condensing
Atmospheric pressure
：
70kPa~106kPa
Security Class
Type of protection against electric shock: internally powered equipment.
Degree of protection against electric shock: Type BF applied part.
Degree of protection against ingress of water: IPX0
Safety degree of using in flammable anesthetic gas blending with air, oxygen or nitrous oxide: Non-AP/APG
No application parts of the thermometer prevents defibrillation charge effect.
No application parts of the thermometer output signal.
The thermometer is impermanent installed device.
Storage and Transportation
Transportation
The thermometer can be transported using general transportation tools.
Severe vibration, shock, or rain must be avoided during transportation.
Storage
The thermometer must be packaged and then stored in a well-ventilated room without corrosive gas. The ambient
temperature must be between -20 and +55(-4
℉
-131
℉
), the relative humidity must be lower than 95%(non-condensing),
and the atmospheric pressure must be 50-106kPa.
Warranty and After-Sale Service
The device is under warranty for one year from the date of purchase.
The batteries, the packaging, and any damage caused by improper use are not covered by the warranty.
Excluding the following user-caused failures:
Failure resulting from unauthorized disassembly and modification.
Failure resulting from an unexpected dropping during application or transportation.
Failure resulting from not following the instructions in the user’s manual
