Ningbo JB-P03 Скачать руководство пользователя страница 15

14. ATTENTION

POOL

 ALARM

has been designed to aid in the detection of unwanted intrusions into

 

unsupervised pools. POOL

 ALARM

IS A SAFETY ALARM SYSTEM AND NOT A

LIFE SAVING DEVICE. “This device is not intended to replace any other safety
consideration -e.g. adult supervision, lifeguards, fences, gates, pool covers, locks, etc.,
and some devices may not detect gradual entry.”

POOL

 ALARM

is made of sturdy UV. Because the alarm is electronic and

 

mechanical, great care should be taken not to drop the unit, it may break, sun and rain
will not hurt the alarm.

15

ˊ

KEEP IN MIND 

-DO read the manual carefully;
-DO install the alarm properly;
-DO test the alarm properly;
-Do adjust submersible tube properly to meet the water level;
-Do not leave until the unit is activated after swimming;
-Do replace the battery when in low voltage;
-Do supervise the pool, when the alarm in the Sleep/Swimming status;
-DON’T start your alarm immediately after swimming.

-If your pool has a tilted soft slope less than 30% and without discontinuity, this

 

pool alarm is not enough to supervise, you need to use another alarm system to
complete.

-Turn off the system only when pool is not to be used for long time or family is out

 

for holiday, and do remember to start the alarm system before using the pool or

 

back from holiday.

  

 

 

 

 

 

   

 

 

16. TROUBLESHOOTING

Q: alarm system does not work in test?
A: check if the battery is installed correctly and control botton in right side.
Q: can not move the button?
A: be sure to press down it before move
Q: false alarm by strong wind?
A: move control botton to right to be into Sleep/Swimming status.
Q: keep alarming after swimming when activate the system?
A: water is not calm down, be sure to activate system after the water calm down.
Q: my pool is bigger than 16x32 square feet, if extra alarm system needed?
A: you’d better install more

Q: no alarm when drop object in pool?

A: check the submersible sensor tube into water lever 10cm deep, or weight of the object

Q: I do not want to drill hole on my pool, how to do?
A: place alarm edge of the pool side.

Содержание JB-P03

















Отзывы: