6. Operation
.23.
6.5.3 Power curve
Select the Power Curve menu to display the following submenu:
Set power Curve
Select Power Curve
NOTE:
Please strictly follow below steps to set power curve or the setting could
be failed.
A) Set Power Curve
This function use for customizing the power curve.
The steps to set power curve are listed as follows:
Step1:
Set Grid OFF first
(refer to 6.5.1).
NOTE:
The power curve must be suitable for the wind turbine, it must be set by
professionals
!
Step2: Enter
Set Power
Curve
sub
menu
(see Figure.6.14)
Set Power Curve
Figure 6.14
YES=<ENT> NO=<ESC>
Power Curve No.: 01
Press up or down to choose the power curve No. which is from 01 to 03 (see Figure
6.15). Press ENTER to power
curve setting page.
NOTE:
The 01,02,03 power curve is for customer edit; the 04 power curve is the
default value and could not be changed.
Figure 6.15
Step3: Choose the power curve No.
6. Operation
.22.
Selecting the “User-Def” menu will access to the following submenu (see Figure 6.12),
Figure 6.12
Press the UP/DOWN keys to scroll through items. Press the ENTER key to edit the highlighted
item. Press the UP/DOWN keys again to change the setting. Press the ENTER key to save the
setting. Press the ESC key to cancel changes and returns to the previous menu.
OV-V: 262V
UN-V: 210V
OV-V: 240---270V
UN-V: 180---210V
OV-G-F: 60.3
—
62.0Hz(50.3---52.0Hz)
UN-G-F: 57.0
—
59.5Hz(47.0---49.5Hz)
Below is the setting range for “User-Def”. Using this function, the limits can be changed
manually.
6.5.2 Grid ON/OFF
This function is used to start up or stop the power generation of GCI Single Phase
Inverter (see Figure 6.13).
Grid ON
Grid OFF
Figure 6.13 Set Grid ON/OFF
Screens can be scrolled manually by pressing the UP/DOWN keys. Press the ENTER key
to save the setting. Press the ESC key to return to the previous menu.
6.5.3 Clearing Energy
NOTE:
Please, set "Grid ON" to start up the inverter after the settings (refer to
Section 6.5.2). Otherwise the inverter won't start up.
NOTE:
The " User-Def" function can be only used by the service engineer and must
be allowed by the local energy supplier.
