Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control.
Should the heater reach an unsafe temperature, the heater will
automatically turn O F F. To reset:
Unplug the power cord from the outlet.
Turn the Power Switch on the CONTROL PANEL to OFF. Wait
at least 5 minutes.
Inspect the fireplace to make sure no vents are blocked, or
clogged with dust or lint. If they are, use a vacuum to clean the
vent areas.
With the Power Switch in the OFF position, plug the power cord
back into the outlet.
If it switches off again, UNPLUG THE HEATER RIGHT AWAY!
Have the outlets, wiring, and breaker box inspected by a
professional. Make necessary repairs before using the heater.
•
•
•
•
6. CARE AND MAINTENANCE
ALWAYS
turn the appliance
OFF
and
unplug the power
cord from the outlet
before cleaning, performing
maintenance, or moving this fireplace. Failure to do so
could result in
electric shock, fire, or personal injury.
NEVER immerse in water
or
spray with water.
Doing
so could result in
electric shock, fire, or personal
injury.
Risk of electric shock! DO NOT OPEN! No user-
serviceable parts inside!
•
•
•
CLEANING
Metal:
Buff using a soft cloth, slightly dampened with a citrus oil-based
product.
DO NOT
use brass polish or household cleaners as these
products will damage the metal trim.
•
•
13
