1. Place the base in a proper
position (as shown above, the
bracket hook is located below)
and wrap the strap around the
vehicle body.
2. Fasten the strap onto the strap
hook of the base. Make sure it is
firmly a
ffi
xed.
3. Press the remaining part of the
strap into the storage slot.
1. Align the holes on the bottom of
the speaker with those in the
base.
2. Press down until you hear a
"clicking" sound.
3. When removing the speaker,
press the disassembly switch
while lifting the speaker
upward.
2 Installation
Install the Base
Install/Remove the Speaker
This chapter takes Ninebot GoKart Pro as an example. The specific
installation steps depend on the vehicle model.
2
