【B
ef
or
e
Use
】
12
⑫
⑨
⑩
Hook
(left and
right)
⑪
Fastener
⑧
⑦ Fasten the zippers of the arm
pad and the chair seat.
Put the air hose and cable
connected in step⑥ inside the
arm pad.
※
Hang the back cover onto the
hook of the armrests and lock
Be careful not to pinch the
leather cover, and make sure
that the leather cover on the
side of fixed belt on the back
cover (lower) is inside the
armrests.
※
Follow steps ④~⑦ to connect
the arm on the opposite side.
Hang the back cover (upper)
fixing belt onto the hook on
the back of the left and right
armrest and press it inward.
Be careful not to pinch the cable
of the remote control.
※
To adjust the angle again, be
sure to loosen the screw before
adjustment.
※
Push the cable of the remote
control through the round
hole on the front side of the
arm component (right) and
press the snap button firmly.
You can choose to use a
magnet or the arm bracket to
hold store remote control on
the arm. If using the magnet,
no assembly is necessary. If
using the bracket, unscrew
the magnet on top of the
armrest (right), place the
bracket on the armrest, then
secure with the screw.
Adjust the remote control
bracket to your preferred
angle before installation.