________________________________________________________________
Nimbus
TM
EU Patient Manual --560-IFU-IT1098, Rev. A 17
Infusion Display screen
While the infusion is running and medication is delivered, the screen will never
go blank. The protocol name will show at the top left corner of the screen and
the Basal Rate will display in the center. Additional therapy specific information
such as VTBI, VINF, Next Intermittent Bolus (PCA), PCA Bolus Lockout (PCA),
and Dose Infused will alternate along the bottom of the LCD screen during the
infusion.
The drug/fluid bag icon will display at the top right corner of the screen. A
green LED light will display for 10 minutes indicating the infusion is actively
running.
Note:
The LED will turn off after 10 minutes of operation and will remain off
until any new key is pressed or an alert condition is detected. This is normal.
Acknowledge an Alert
In the event a condition that could interrupt an
infusion is detected, the screen will change to
display an alert message. The LED will flash a red
light. An audible signal may also sound. Please
refer to Section 5: Trouble Shooting for detailed
explanations
of
the
error
message
and
corresponding user response.
Note:
Press the RUN/STOP key
to acknowledge the alert. The audible
alert, if present, will be silenced for 10 minutes.
