PN 1001933 rev 2
© NimbeLink Corp. 2022. All rights reserved.
16
4. Connect to Amazon AWS
4.1 Opening an SSL Socket
After the Skywire has been configured properly, it is ready to establish a connection to
the AWS server.
First, find the endpoint for the “thing” that was created on the AWS website. To do this,
navigate to the “Things” page using the menu on the left-hand side of the AWS console
page. Click on the “thing” and then navigate to the “Interact” menu. The correct menu
should look something like this:
In the image above, the URL for the device endpoint has been enclosed in a red rectangle.
Record whatever URL shows up in this page, as it will be needed in the SSL socket
connection command.
