7
CHARGE
Use the cable in the packaging to charge your EVO 360 batteries. The blue LED on the top of the
cam will turn on when charging.
The blue light turns off when the batteries are fully charged.
IMPORTANT:
The EVO 360 is normally charged via PC USB slot: if a charger is used, check the output voltage
before use.
Make sure it is 5V and between maximum 0.5 and 2 Ampere.
FUNCTIONS
The EVO 360 can work in both video camera and photo camera modes.
When on, press
to switch from one mode to the other and the corresponding mode icon
will be displayed on the screen.
RECORDING
In recording mode, press the record button
.
The cam starts recording and the buzzer sounds.
The video recording time will be displayed on the screen.
Press the button again
to stop recording.
The video will be automatically saved in the camera memory card. The remaining available
recording time will be displayed.
CAR-CARRYING
OR
DASH-CAM
MODE
Press the
key to switch EVO 360 to Dash-cam mode.
Press
to start recording.
In this mode, every recorded file will last 3 minutes. When the memory card is
full, the first recording will be deleted followed cyclically by the least recent videos.
PHOTO
Press the
key to switch EVO 360 to camera mode.
Press
to take a picture.
The number of images that can still be saved by EVO 360 (estimate) will be
displayed.
Содержание EVO360
Страница 1: ...1 MANUALE UTENTE...
