38
EN
4.2.2 Switching on the
washer when it is
connected to open
tanks (suction mode)
1. Before connecting the deter-
gent intake set to the wash-
er, fi ll the hose with water.
2. Turn main switch to position
»
I
«.
3. Unlock the spray handle and
activate it.
Max. suction height = 0 m.
4 Operation
4.1 Connecting
the
spray
lance to the spray
handle
1. Pull the blue quick-release
grip (A) of the psry handle
forwards and lock it by turn-
ing it to the left.
2. Insert the nipple of the spray
lance (C) into the quick-re-
lease connection and turn
the blue quick-relese grip to
the right (B).
3. Pull the psray lance (or
other accessory) forwards to
check that it is securely at-
tached to the spray handle.
4.2
Switching on the washer
4.2.1 Switching on the washer
when it is connected to a
water supply
1. Main switch
Turn the switch to position
»
I
«.
2. Unlock the spray handle and
activate it.
3. Lock the spray handle even
during short pauses.
The washer switches off auto-
matically after the spray handle
has been closed. To start the
washer again, activate the
spray handle.
NOTE!
Operate the spray handle se-
veral times at short intervals to
vent the system.
3.4
E
lectrical connection
1. Observe safety instructions
in chapter 1.
2. Put the plug into the electri-
cal socket.
NOTE!
Always remove any dirt from
the nipple before connecting
the spray lance to the spray
handle.
A
B
C