background image

10

NEPTUNE PE/DE

Original Instructions

5.2   Some typical cleaning tasks
5.2.1 Agriculture

Task

Accessories

Method

Stables
Pig Pens, Sties

Cleaning of walls, 
fl oors and equip-
ment 

Disinfectant

Chemical Foam Injec-
tors
Foam lance
Powerspeed lance
Floor Cleaner

Detergents
Universal
Alkafoam

Disinfectant 
DES 3000

1.  Soaking – apply foam to all surfaces (bottom to top) 

and wait for approx. 30 minutes.

2.  Remove the dirt from surfaces with the high pres-

sure lance or chosen accessory. Again, clean from 
bottom to top on vertical surfaces.

3.  To fl ush away large quantities of dirt, change to low 

pressure mode and use the higher fl ow to push 
away the dirt.

4.  Use recommended disinfectant products and meth-

ods to ensure hygiene. Apply DES 3000 disinfectant 
once the surfaces are perfectly clean.

Machinery
Tractors
ploughs etc.

Detergent injection
Powerspeed lances
Curved lances and 
underchassis washers
Brushes

1.  Apply detergent to vehicle or equipment surfaces in 

order to soften up dirt and grime. Apply from bottom 
to top.

2.  Proceed with cleaning using the high pressure 

lance.  Clean again from bottom to top.  Use acces-
sories to clean in diffi cult to reach places. 

3.  Clean fragile areas such as motors, rubber at lower 

pressure levels to avoid damage.

5.2.2 Vehicle

Task

Accessories

Method

Vehicle bodywork

Standard lance
Detergent injection
Curved lances and 
underchassis washers
brushes

Detergents
Active Shampoo
Active Foam
Sapphire
Super Plus
Aktive Wax 
Allosil
RimTop

1.  Apply detergent to vehicle or equipment surfaces 

in order to soften up dirt and grime. Apply from bot-
tom to top. In cases of particularly dirty vehicles, 
pre-spray with a product such as Allosil in order to 
remove traces of insects etc, then rinse at low pres-
sure and apply normal car cleaning detergent. Let 
detergents settle for 5 minutes before cleaning off. 
Metallic surfaces can be cleaned using RimTop.

2.  Proceed with cleaning using the high pressure 

lance.  Clean again from bottom to top.  Use ac-
cessories to clean in diffi cult to reach places.  Use 
brushes in order to add a mechanical cleaning ef-
fect. Short lances can help for cleaning of motors 
and wheel arches. Curved lances or undercarriage 
washers  can be valuable for the cleaning of car 
underchassis and wheel arches.

3.  Clean fragile areas such as motors, rubber at lower 

pressure levels to avoid damage.

4.  Apply a liquid wax using the pressure washer in 

order to protect the bodywork from pollution.

Содержание NEPTUNE DE

























Отзывы: