Operation of Air Mover
* Read operators manual thoroughly prior
to operating or servicing this machine.
BASIC OPERATION
1] Check machine for any obstructions in fan
prior to operation.
* If an item blocks the intakes of the blower,
this will hurt the performance of the blower, and
could cause the motor to overheat.
2] Adjust machine to desired position for
operation by either pulling it back to it’s
preset height adjustments, or by lowering
the “kick stand” and setting the machine on
the stand.
3] Plug power cord into a grounded outlet.
* Do not use an extension cord in
conjunction with the standard power cord.
4]
This machine has three power settings Turn
the power knob to the desired speed. Low =
1, Med = 2 & High = 3.
5] To stop the machine at any time, simply turn
the power knob to the “off” position.
* Never stick any object into the air inlet
vents or the air outlet vent.
MAINTENANCE
To keep the machine performing well for many
years, please follow the following maintenance
procedures.
* Always confirm that the machine is
unplugged prior to performing any
maintenance or repairs.
1] Unplug machine as soon as you are done
using it.
2] Wrap the power cord around the carrying
handle.
3] Check power cord for any damage. If any
damage is detected, replace the cord
immediately.
4] If you have the wheel kit, lubricate wheels
with a water resistant lubricant every
month.
5] Check machine for loose or missing nuts
and bolts, and replace as necessary.
6] Clean the outside of the machine with a mild
cleaner.
STORAGE
1] Unplug machine from power source.
2] Store in upright position in a dry area.
4
