Nilfisk-Advance SR 9772 56109414, Инструкция по эксплуатации

Страница: 20 / 40

20 - FORM NO. 56041803 SR9772
OPERATING INSTRUCTIONS
DRAIN HOSE
DRAIN HOSE PLUG
FLOAT BALL
VACUUM RELIEF VALVE
WING NUT
MOTOR COVER
COVER CLIP
22. Inspect the scrub path verifying the scrub performance and solution recovery.
23. Continue scrubbing and monitoring the scrub path for maximum performance.
24. Warning lights on the scrubber control panel for low solution or high recovery will illuminate when the solution level is low or the
recovery tank is full.
25. The recovery tank fl oat ball will activate when the recovery tank is full. The vacuum air fl ow bypass will activate, discontinuing
solution recovery.
26. Activate the switch at the control panel to raise scrub deck. Press and hold the switch in upward position for 2 seconds and
release, the switch will return automatically to the neutral position.
Con fi rm that the scrub deck is in the raised position.
27. Continue moving over the scrub area until the squeegee recovers the solution.
28. Activate the switch at the control panel to raise the squeegee and turn off the vacuum system. Press and hold the switch in an
upward position for 2 seconds and release, the switch will return automatically to a neutral position. Con fi rm that the squeegee is
raised and the vacuum has stopped.
29. Move the hydraulic control lever forward to off /de-energize position.
30. Move the scrubber to the appropriate location to drain the recovery tank by
fi rst reducing the throttle to low idle, depress clutch,
select range and gear, slowly release clutch and increase throttle.
31. Park the scrubber at the location by depressing the clutch and reducing throttle to low idle, move range and gear levers to
neutral, apply brakes. When fully stopped, apply the parking brake and turn off engine.
32. Lower the drain hoses on rear of unit to direct recovered fl uid to appropriate dump location.
33. Remove the drain plug.
https://harrissupplyind.com - To Order Parts Call 608-268-8080