Nilfisk-Advance SR 9772 56109414, Инструкция по эксплуатации

Страница: 19 / 40

SR9772 FORM NO. 56041803 - 19
OPERATING INSTRUCTIONS
FILL SOLUTION TANK
CLOSED SOLUTION TANK
SOLUTION FLOW KNOB
10. Open the solution tank access door on top of each tank.
11. Fill the solution tanks with water. (The solution tanks are linked together,
so you can fi ll through one access door. Add the recommended amount
of detergent to each solution tank allowing for even chemical dispersion).
(Each tank has a capacity of 100-gallons).
12. The high solution light on the scrubber control panel will illuminate when
the solution tanks are full.
13. While the solution tanks are fi lling, inspect machine. (Check and clean out
doors, ensuring the doors are sealed properly; inspect squeegee blades.
Perform maintence as required.)
14. Close the solution tank access doors once the tanks are fi lled.
15. Start the tractor following New Holland operating instructions, release
the parking brake, and drive the scrubber to work area by fi rst reducing
the throttle to low idle following start-up, depress clutch, select range and
gear, slowly release clutch and increase throttle.
16. Stop the machine by depressing the clutch and reducing throttle to low
idle, move range and gear levers to neutral, apply brakes.
17. Depress clutch and select the appropriate gears to scrub at a speed of
2-3 mph (Low range is suggested).
18. Activate scrub deck and squeegee switches on the scrubber control panel
19. Pull the hydraulic control lever back to energize.
20. Begin scrubbing.
CAUTION
When SHIFTING from one range to another, forward to reverse, or reverse
to forward, the operator MUST reduce the speed (throttle) to LOW IDLE, shift
range and/or gear, then increase the speed (throttle).
21. Adjust the water fl ow by turning the solution fl ow knob located on control
panel to optimize scrubbing performance.
https://harrissupplyind.com - To Order Parts Call 608-268-8080