background image

S31N1005P(1)00-11

15

MAINTENANCE

Warning

: these operations must carried out with 

the machine stopped, the parking brake set and 
with the key switched off. All periodic or 
extraordinary maintenance operations must be 
performed by skilled personnel, or by an authorized 
service center.

OPTIONAL

In addition to the standard accessories supplied 
with the machine, the following optional are also 
available:

filters:
-filter BIA US grade
-filter BIA US GC grade
-brushes with different characteristics depending 

on use

-mini dirt containers

-flashing beacon
-back-up alarm
-front bumper roller

For further information regarding each option ( 
article number, price, etc. ) please contact Nilfisk 
directly.

(*) 3050 to 3100 engine shaft RPM with no function working ( suction closed and main broom disengaged ) 
and battery voltage at about 27 Volt.  

Note

: The battery life will depend on the level of periodic maintenance ( checking the electrolyte level and 

density). If the machine is not used for a long time (ex. 4 to 6 weeks) it will be necessary to recharge the 
batteries to make sure their voltage does not drop below 20 Volts. Note: unused batteries discharge 
themselves.

CHECK

UPON 

DELIVERY

TWICE A 

WEEK

EVERY

WEEK

EVERY

20/ hours

EVERY

50/ hours

EVERY

100/ hours

EVERY

400/ hours

Battery liquid level and voltage 
level

Engine filter cleaning 

Panel filter cleaning

Engine oil level check

1

st

 time

Engine oil replacement

1

st

 time  or

within a 

month

or

within 8 

month

Engine RPM check and adjustment 
(*)

Check the brushes of all electric 
motors and replace them if worn

Belt tension 

Brake adjustment

Filter-shaker

Nut and screw tightness

Side and central brush condition 

Filter gasket seals and flars 

Drive wheel chain: clean using an 
appropriate solvent or diesel fuel

Содержание SR 1005P













Отзывы: