Nilfisk-Advance SR 1000S B, Инструкция по эксплуатации

Страница: 42 / 74

USER MANUAL
2 146 1957 000
(4)03-2016
INTRODUCTION
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all
necessary information to use the machine properly in a safe
and autonomous way.
It contains information about technical data, operation,
storage, maintenance, spare parts and safety.
Before carrying out any procedure on the machine, the
operators and qualified technicians must read this Manual
carefully. Contact Nilfisk-Advance in case of doubts regarding
the interpretation of the instructions and for any further
information.
TARGET
This Manual is intended for operators and technicians
qualified to perform the machine maintenance.
The Operators must not carry out operations reserved for
qualified Technicians. Nilfisk-Advance will not be answerable
for damages coming from the non-observance of this
prohibition.
HOW TO KEEP THIS MANUAL
The User Manual must be kept near the machine, inside an
adequate case, away from liquids and other substances that
can cause damage to it.
CONFORMITY CERTIFICATE
Figure A shows the documentation certifying the sweeper
conformity with the law in force.
IDENTIFICATION DATA
The machine model and serial number are marked on the
plate (1, Fig. U) applied on the frame and can be read by
lifting the hood (10, Fig. C).
The machine model year is written in the EC statement and it
is also indicated by the first two figures of the machine serial
number.
This information is useful when ordering machine spare parts.
Use the following table to write down the machine
identification data for any further reference.
OTHER REFERENCE MANUALS
– Electronic Battery Charger Manual (if equipped), to be
considered an integral part of this Manual
– Moreover, the following Manuals are available:
•
Spare Parts List (supplied with the machine)
• Service manual (that can be consulted at
Nilfisk-Advance Service Centers)
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures
must be carried out by qualified personnel or by
Nilfisk-Advance Service Centers listed at the end of this
Manual. Only original spare parts and accessories must be
used.
Contact Nilfisk-Advance for service or to order spare parts
and accessories, specifying the machine model and serial
number.
CHANGES AND IMPROVEMENTS
Nilfisk-Advance constantly improves its products and
reserves the right to make changes and improvements at its
discretion without being obliged to apply such benefits to the
machines that were sold previously.
Any change and/or addition of accessory must be approved
and performed by Nilfisk-Advance.
NOTE
Two copies of the original EC Declaration of
Conformity are provided together with the
machine documentation.
MACHINE model ...........................................................
MACHINE serial number ...............................................