FORM NO. 56041389 - Retriever
™
4600 - 2
This manual will help you get the most from your Nilfisk-Advance Retriever™ 4600. Read it thoroughly before operating the machine.
Note: Bold numbers in parentheses indicate an item illustrated on pages 5-6.
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
PARTS AND SERVICE
Repairs, when required, should be performed by your Authorized Nilfisk-Advance Service Center, who employs factory trained service personnel,
and maintains an inventory of Nilfisk-Advance original replacement parts and accessories.
Call the NILFISK-ADVANCE DEALER named below for repair parts or service. Please specify the Model and Serial number when discussing your
machine.
(Dealer, affix service sticker here.)
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
NAME PLATE
The Model and Serial Number of your machine are shown on the Nameplate on the right side of the machine. This information is needed when
ordering repair parts for the machine. Use the space below to note the Model and Serial Number of your machine for future reference.
MODEL
SERIAL NUMBER
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
UNCRATING THE MACHINE
When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton
so that it can be inspected. Contact the Nilfisk-Advance Customer Service Department immediately to file a freight damage claim.
1
After removing the crate, remove the wooden blocks next to the wheels.
2
Read the instructions in the
Preparing the Machine For Use
section.
3
Place a ramp next to the front end of the pallet.
4
Read the instructions in the
Operating the Machine
section, slowly drive the machine forward from the pallet to the floor. Keep your left foot
lightly on the brake pedal until your sweeper is off the pallet.
CAUTION!
Use extreme CAUTION when operating this sweeper. Be certain that you are thoroughly familiar with all of the operating instructions
prior to using this sweeper. If you have any questions, contact your supervisor or your local Nilfisk-Advance Industrial Dealer.
Should your sweeper malfunction, do not attempt to correct the problem unless your supervisor directs you to do so. Have a qualified
company mechanic or an authorized Nilfisk-Advance Dealer Service person make any necessary corrections to the equipment.
Use extreme care when working on this machine. Neckties, loose clothing, long hair, rings and bracelets can get caught in moving parts.
Turn the Key Switch (4) OFF, set the Parking Brake (24) and disconnect the batteries before working on the machine. Use good
common sense, practice good safety habits and pay attention to the yellow decals on this machine.
WARNING!
NEVER OPERATE THIS MACHINE NEAR FLAMMABLE LIQUIDS OR VAPORS.
INTRODUCTION
