Nilfisk-Advance MH 5M Скачать руководство пользователя страница 20

20

1)

 Options / model variants

Original instructions

9 Further information

9.1 

Recycling the cleaner

Make the old cleaner unusable 
immediately.
1. Unplug the cleaner and cut 

the power cord.

Do not discard of electrical ap-
pliances with household waste.
As specified in European Direc-
tive 2002/96/EC on old electrical 

and electronic appliances, used 
electrical goods must be col-
lected separately and recycled 
ecologically.
Contact your local authorities or 
your nearest dealer for further 
information.

9.2 Guarantee

Our general conditions of 
business are applicable with 
regard to the guarantee.
Unauthorised modifications 
to the appliance, the use of 
incorrect accessories, spare 
parts and cleaning chemicals in 
addition to using the appliance 
in a way other than for the 
intended purpose exempt the 
manufacturer from any liability 
for the resulting damage. 

US only:

This warranty is in effect from 
the first day of purchase by the 
end user.

Each machine will have one 
(1) year coverage, from date 
of purchase by the end user, 
covering parts found defective 
due to faulty components, 
materials and/or bad 
workmanship. Not included in 
this warranty coverage are parts 
found defective due to:

-  Normal wear and tear (such 

as seals, valves, pistons, 
bearings, etc.)

-  Machine working under ab-

normal conditions.

-  Machines being misused.
-  Machines being repaired or 

tampered with by unauthor-
ized person(s).

-  The use of parts other than 

Nilfisk Cleaning Systems, 
Inc. original spare parts and/
or accessories.

The burner coil on all 

Nilfisk

 

Cleaning Systems, Inc. hot 
water/steam cleaners is under 
warranty for two (2) years 
against defects, and the high 
pressure hose is covered for an 
initial 30 days, under the same 
conditions described above.

Nilfisk

 Cleaning Systems, Inc. 

will cover labor by an authorized 

Nilfisk

 CSI Dealer for a 12-month 

period after the date of purchase 
of the machine by the end user.

No other costs, other than laid 
out in this warranty program, will 
be covered by the warranty.

Dated, End-User proof of 
purchase must be submitted 
with any claim for Warranty 
Service. 

Содержание MH 5M
























Отзывы: