FORM NO. 56041406 / Hydro-Retriever
™
2052 - 3
revised 3/00
INTRODUCTION
This manual will help you get the most from your Nilfisk-Advance Hydro-Retriever™ 2052 Floor Scrubber. Read it thoroughly before operating the machine.
References to “right” and “left” in this manual mean right or left as seen from the driver’s seat. Bold numbers in parentheses indicate an item illustrated on pages
12-15.
PARTS AND SERVICE
Repairs should be performed by your Authorized Nilfisk-Advance Service Center, who employs factory trained service personnel, and maintains an inventory of
Nilfisk-Advance original replacement parts and accessories. Please specify the Model and Serial Number when discussing your machine.
NAMEPLATE
The Model Number and Serial Number of your machine are shown on the Nameplate, located on the wall of the operator’s compartment. This information is needed
when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future reference.
MODEL NUMBER
SERIAL NUMBER
UNCRATING THE MACHINE
When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so that it can
be inspected. Contact the Nilfisk-Advance Customer Service Department immediately to file a freight damage claim.
1
After removing the crate, remove the wooden blocks next to the wheels.
2
Check the engine oil level, add oil if necessary.
3
Check the engine coolant level, add coolant if necessary.
4
Check the hydraulic oil level, add oil if necessary.
5
Read the instructions in the Preparing the Machine For Use section of this manual, then fill the fuel tank.
6
Place a ramp next to the front end of the pallet.
7
Read the instructions in the Operating Controls and Operating the Machine sections of this manual and start the engine. Slowly drive the machine forward
from the pallet to the floor. Keep your foot lightly on the brake pedal until the machine is off the pallet.
CAUTION!
Use extreme CAUTION when operating this machine. Be certain that you are thoroughly familiar with all operating instructions before
using this machine. If you have any questions, contact your supervisor or your local Nilfisk-Advance Industrial Dealer.
If the machine malfunctions, do not try to correct the problem unless your supervisor directs you to do so. Have a qualified company mechanic or an authorized
Nilfisk-Advance Dealer service person make any necessary corrections to the equipment.
Use extreme care when working on this machine. Loose clothing, long hair, and jewelry can get caught in moving parts. Turn the Key Ignition Switch OFF and
remove the key before servicing the machine. Use good common sense, practice good safety habits and pay attention to the yellow decals on this machine.
MODEL
ENGINE
ENGINE
NUMBER
MAKE
MODEL NUMBER
FUEL
56459500, 56459502
FORD
VSG 413I-6005-A*
GASOLINE
56459501, 56459503
FORD
VSG 413I-6005-A*
PROPANE
* Note: Reference the separately supplied engine manufacture’s maintenance and operator manual for more detailed engine specification and service data.
