B-10 / ENGLISH
B-10
- FORM NO. - 56041703 - BA 625, BA 725, BA 825
INSTALLING THE BRUSHES (DISC SYSTEM)
INSTALL THE BRUSHES (CYLINDRICAL SYSTEM)
CAUTION!
Turn the key switch off (O) and remove the key, before changing the brushes, and before opening any access panels.
1
Make sure the Brush Deck is in the RAISED position.
Make sure the Key Switch
(A)
is off (O)
.
2
See Figure 3.
To access the brushes loosen the
black knobs (one on each side) on top of the idler
assemblies
(24)
and remove the idler assemblies.
Slide the brush into the housing, lift slightly, push and
turn until it seats. Re-install the idler assemblies.
CAUTION!
Turn the key switch off (O) and remove the key,
before changing the brushes, and before
opening any access panels.
1
Make sure the Brush Deck
(7)
is in the RAISED
position. Make sure the Key Switch
(A)
is off (O)
.
2
If using pads, install the pads on the pad holders.
3
See Figure 2.
To mount the Brushes
(AA)
(or
pad holders) align the Lugs
(BB)
on the brush
with the holes on the mounting plate and turn
to lock in place (turn the outside edge of brush
towards the rear of machine as shown
(CC)
).
FIGURE 2
revised 1/07
FIGURE 3
Содержание BA 625
