USE AND MAINTENANCE MANUAL
12
08812942(3)2004-05 A
MAINTENANCE
The machine proper and safe operation is guaranteed by a careful and constant maintenance.
The following table sums up the scheduled maintenance. The intervals indicated can be changed to suit working
conditions. These must be defined by the person in charge of the maintenance.
All scheduled or extraordinary maintenance operations must be performed by skilled personnel, or by an authorized
Service Centre.
This Manual contains the Scheduled Maintenance Table and describes only the easiest and most common maintenance
procedures.
SCHEDULED MAINTENANCE TABLE
(1): and after the first 8 working hours
(2): contact an authorized Nilfisk-Advance Service Centre for these maintenance operations
(*): BA 430S D / BA 510S D versions only
WARNING!
The operations must be carried out with the machine off and the battery disconnected.
Moreover, read carefully the instructions in the Safety chapter before performing any maintenance
operation.
NOTE
For other maintenance procedures contained in the Scheduled Maintenance Table refer to the specific
Service Manual that can be consulted at any Service Centre.
Operation
Daily, after
machine use
Weekly
Every six months
Yearly
Squeegee cleaning
z
Squeegee blade check (and replacement)
z
Brush cleaning
z
Tank and vacuum grid with float cleaning
z
Detergent filter cleaning
z
Battery charge
z
Lead battery (WET) fluid level check
z
Nut and screw tightening check
z
(1)
Brush electric motor carbon brush check or replacement
z
(2)
Vacuum electric motor carbon brush check or replacement
z
(2)
Drive motor brush (or carbon brush) check or replacement
(*)
z
(2)
Grease drive shaft bearings (*)
z
