6 -
Whirlamatic
Operator Manual
INSTALLING A PAD
Pad Retainer
Pad
Pad Holder Hub
PREPARING THE FLOOR
Before each use of this machine, the floor must be clean and completely dry. Clean the floor with an automatic floor scrubber
or a damp mop, using a solution of water and neutral cleaner.
CAUTION!
This machine should be used only on floors that are coated with a floor finish suitable for burnishing. Contact your local
Advance Distributor for further information on floor finishing products.
PREPARING THE MACHINE FOR USE
WARNING!
Moving parts - To reduce the risk of injury, unplug before servicing.
INSTALLING THE PAD
To install a pad, tip the machine back on it’s handle. Remove the Pad Retainer (in the center of the pad holder) by turning
clockwise to loosen.
Put the proper size pad on the pad holder. Re-install the Pad Retainer by turning counter-clockwise to tighten.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
