USING THE VACUUM
TURNING THE MACHINE ON/OFF 1
1. Plug the vacuum cleaner into an approved power source.
2. Turn on the vacuum cleaner by rotating the main switch
to the “ON” position (Figure 1).
3. Turn off the vacuum cleaner by rotating the main switch
back to the “OFF” position (Figure 1).
CLEANING THE MAIN FILTER
If the performance of the vacuum cleaner decreases during
use, it may be necessary to clean the primary filter:
1. Turn off the vacuum and disconnect the vacuum from
2
its power source.
2. Actuate the filter shaker "A" (Figure 2) by raising
and lowering the lever.
3. Repeat this several times to shake the dirt from the
primary filter.
4. Wait a few minutes for the dust to settle at the bottom
of the container.
5. Empty the container
EMPTYING THE CONTAINER
1. Turn off the vacuum and disconnect the
vacuum from its power source.
3 4
2. Detach container "A" (Figure 3) by lifting
the handle.
3. Slide the container out from the machine
and carry the container by the handle (figure 4).
INSTRUCTIONS FOR USE
PAGE 5
