Niles SVL-1, Руководство по установке и эксплуатации, Страница: 9 / 12

8
S
P E A K E R
- L
E V E L
V
O L U M E
C
O N T R O L
3. Make the connections to the SVL-1. Strip 3/8" of insulation
from the end of each wire. Tightly twist the end of each wire
until there are no frayed ends. Insert each wire into the
appropriate hole on the spring-loaded connector terminals.
Be certain that proper phasing is observed — connect the
positive terminals on the SVL-1 to the positive terminals on
the amplifier and speakers and the negative terminals on the
SVL-1 to the negative terminals on the amplifier and speak-
ers. See (Figure 2).
Figure 2
Connecting the
Wires