10
S
P E A K E R
- L
E V E L
V
O L U M E
C
O N T R O L
6. Using the knob on the front of the SVL-1, adjust the vol-
ume of the speakers to the desired listening level.
7. You can turn off the speakers by turning the knob on the
SVL-1 fully counter-clockwise, or by pressing the ON/OFF
button on your speaker selector.
Balancing Speaker Volume
The volume control on your receiver or amplifier serves as
the "master" volume for all speaker pairs connected.
The volume level of the speakers may vary from room to
room. This is caused by several factors. Two lesser factors are
the size of the speaker and its efficiency. The largest factor is
the physical size of the room.
The best way to balance speaker volume is to equip each of
the speaker pairs in your system with a Niles volume control.
The controls allow you to adjust the volume of each speaker
pair individually. If all the speaker pairs in your system are
equipped with Niles volume controls, you can leave the
amplifier or receiver volume set at one position and use the
Niles controls exclusively.
SPECIFICATIONS
Audio Power Handling
60 Watts/channel
continuous music
power
Mounting
Table-top component
Wiring Requirements
Individual runs of
2-conductor speaker
wire. Connectors
accommodate wire
sizes 14-22 gauge
(16 gauge
recommended)
Overall Dimensions
8 1/2" wide x 2" high
x 7 1/4" deep
Weight
2 1/4 lbs.
