IN
ST
A
LL
A
T
IO
N
O
V
ER
V
IE
W
8
INSTALLATION OVERVIEW
The following is an overview for installing your iPOWER
™
product.
• Unpack all of the contents of the AC-6+ carton.
• Plan your system and lay out all of the equipment that will be connected to the AC-6+.
• Place the AC-6+ in the location where it will be used, being sure to follow both the safety pre-
cautions listed in the front of this manual and the placement recommendations on (page 11).
DO NOT plug the unit in yet.
• Plug each of the components into the AC-6+. You may want to make a note on paper
listing the component connected to each outlet.
• With all of the attached components in the OFF position, plug the AC-6+ into the wall.
• With the AC-6+ OFF, attach remote triggering cables (if applicable).
• Test for proper operation.
