VOLUME
CONTROL
SYSTEMS
FEATURES
■
Built-in IR sensor
■
Control Volume and Mute functions with included Remote Control
■
Built-in speaker relay
■
Power handling: 100 watts RMS
■
Selectable impedance magnification 1X, 2X and 4X
■
12 step control, 56dB maximum attenuation
■
Removable screwless connector
■
Recommended use with MSU140, MSU250, MSU480, and MVC HUB4
■
Override control 12VDC @ 0.05mA
■
Sleep function
SPECIFICATIONS
Frequency Response:
20-20khz, +/- 1dB
THD:
<1%
Dynamic Range:
43dB over 12 Steps
Stereo/Mono:
Stereo
DC Resistance:
5 ohm min
Wire Requirements:
Min. 18 AWG and CAT5 for speakers, power, IR and control
Warranty:
Ten-year limited
Color
Stock Number
White
FG01228
Bone
FG01227
Almond
FG01225
Black
FG01226
Automatic Muting Weatherproof Volume Control
NILES AUDIO CORPORATION
12331 SW 130 Street, Miami, FL 33186
1-800-BUY-HIFI
–
www.nilesaudio.com
©2006 Niles Audio Corporation. All Rights Reserved. Niles and the Niles logo are registered trademarks of Niles Audio Corporation.
Stereo Receiver
MSU250
EVC-100
Power, IR, data and power status signal
via category 5 cable
Audio via speaker wire
Niles IR
Flasher
Audio via
speaker
wire
12V DC power
supply plugged
into the receiver’s
switched outlet
12V DC
power supply
plugged
into an
unswitched
AC outlet
powers the
system
RJ45 Pinouts on EVC-100
Basic Connection to MSU250
RJ45
1
2
3
4
5
6
7
8
EVC-100
Override
IR-OUT
IR-IN
NC
NC
12V
GND
Status
Tab Down
Tab
TOP
FRONT
Pin 1
1
8
1
8
EVC-100
