Ret til ændringer forbeholdes
Side 17 af 30
Temp. control
In the ”Temp. control” menu it is possible to chose a room temperature where the unit stops in
order to avoid further cooling of the building if the primary heating shuts down.
” ”
indicates that the menu point flashes and can be set to another value
Use of the CTS602 panel:
- press ESC
to go one step back in the menu
- press
qp
to move up or down in a menu or to adjust an
activated menu
- press ENTER
to activate a menu
- press ENTER
to confirm a menu
- press OFF
to turn off the unit
- press ON
to turn the unit on
Shows the controlling
feeler:
ROOM:
T15 (feeler in the
panel)
TEMP.
CONTROL
SENSOR
PANEL
SENSOR
”PANEL”
PRIORITY
”HP”
PRIORITY
”OFF”
ENTER
ENTER
ENTER
ROOM
LOW 10°C
PRIORITY
HP
HOTWATER
AIR
EXCHANGE
DEFROST
INLET
CONTROL
SERVICE
ENTER
RESTART
OFF
MANUAL
OFF
PRESET
OFF
ROOM
CONTROL
The unit stops at this
room temperature (1-
20°C) - - means that the
function is unactive.
- - should be chosen if
the panel is placed in a
cold environment.
OFF:
ventilation
without heatpump
VP:
ventilation only
with heatpump activ
ENTER
ENTER
EXTERNAL
-1 °C
CENTRAL
HEATING
AIR
QUALITY
MODBUS
ADR
30
DATALOG
INTV 10
Figure 11: The "Temp. control" menu
