Ret til ændringer forbeholdes
Side 10 af 30
Starting and set up of the CTS 602 control
Starting
Before starting the VP 18 EK please check all connections. Also check that the hot-water tank is
filled with water. This is done by opening the hot-water tap.
Set up of the CTS 602 control
In this passage we will go through the service menu of the CTS 602 control. For daily use of the
CTS 602 control please see the CTS 602 directions. (delivered together with the VP 18 EK).
Use of the CTS602 panel:
- press ESC
to go one step back in the menu
- press
qp
to move up or down in a menu or to adjust an
activated menu
- press ENTER
to activate a menu
- press ENTER
to confirm a menu
- press OFF
to turn off the unit
- press ON
to turn the unit on
Figure 4: CTS 602 control
