Nikro 860240 Скачать руководство пользователя страница 3

 

OPERATING INSTRUCTIONS 

 

Inspection  

 
Thoroughly inspect your machine for any shipping damage. Your machine has already been thoroughly 
tested at the Nikro Industries manufacturing plant prior to shipping. 
 

Electrical Specification 

 
This machine is designed to operate on a 15 amp. 115V.,  60 hz., AC circuit. A deviance of this could 
cause serious damage to the unit.  
 

Grounding Instructions  

 
This machine is equipped with a grounding type cord and three 
prong plug. Make sure that the plug is connected to an outlet with 

 

three receptacles designed for use with the three prong plug. (See 
Illustration) Never use an adapter with machine.  
 

Maintenance  

 
Lubrication of this motor is not required as it is equipped with sealed bearings.  
 
Always keep the air cooling intake screen free, not allowing any restriction of airflow. Airflow restriction 
will overheat and damage the motor.  
 
To prolong the life of the H.E.P.A. filter, empty, clean, and replace bags and filters regularly as described 
in the following sections. 
 

SAFETY INSTRUCTIONS 

Read all safety instructions before using! 

 
1. Electrical shock could occur if used outdoors or on wet surfaces.  
2. Always store machine indoors in a dry area. If machine is dropped in water or left in rain, it should be 
serviced by an authorized service technician prior to plugging the unit in.  
3. Prior to plugging in machine, always inspect cord for cuts and exposed wires. If these problems are 
found, return the machine to an authorized service technician..  
4. Never use the cord as a handle, or pull the machine by using the cord.  
5. Never unplug this machine or any other electrical appliance by pulling on the cord.  
6. Do not wrap the cord around the dome. Wrapping the cord around the dome will restrict the motor 
from exhausting properly and will result in overheating and damaging the motor.  
7. Keep hair, fingers, and other objects away from all moving parts and openings on this machine.  
8. This vacuum cleaner should never be used in explosion-hazardous areas or to pick up combustible or 
flammable liquids such as gasoline, etc.  
9. Never leave the machine unattended when plugged in or running.  
10. Always have the switch in the OFF position before unplugging the unit.  
11. Do not operate this machine with any of the openings blocked; always keep these areas free of lint and 
dust or any other particles that could reduce the airflow.  
12. Never operate or plug in this machine or any other electrical appliance with wet hands or when 
standing in water.  
13. This machine should never be operated without the proper filters installed in the manner described in 
the following pages of this manual.  
14. This machine should never be serviced by anyone other than an authorized technician. 
15. Use only original NIKRO replacement parts and attachments.  

 

Содержание 860240











Отзывы: