background image

PREFACE

This user’s manual describes the installation and maintenance of wide band consumer boosters. Please do read user manual

carefully before installing and maintaining repeaters. The information in this manual is subject to change without prior notice.

SAFETY WARNINGS

Users must follow the principles below?

Repeater should follow system requirements; assure good grounding and lightning protection.

The power supply voltage of repeater should meet security requirements; any operation shall be carried out
only after turning off power in advance. Only the professional is authorized for the operation.

Do not dismantle machine, maintain or replace its components by yourself, because this way the equipment

may be damaged and you may even get an electric shock.

Do not open the repeater, touch the module of the repeater, or open the cover of the module to touch
electronic component. The components will be damaged due to electrostatic.

Please keep away from heating equipment, because the repeater dissipates heat during working. And do not
cover a booster with anything that influences heat dissipation.

Wir möchten Sie über Besonderheiten der Booster-Nutzung für TMA in Österreich informieren. Die Signalverstärker funktionieren auf TMA Mobilfunk Frequenzen und
daher der Betrieb des Signalverstärkers einer Einverständniserklärung und zusätzlich einer Bewilligung bedarf der TMA erfordert. In diesem Zusammenhang

empfehlen wir, dass Sie der Bewilligung erhalten. Andernfalls, nach TKG 2003, Betrieb der Signalverstärker für TMA untersagt ist und mit einer Verwaltungsstrafe
belangt werden kann.

Содержание MA-2500WF




















Отзывы: