Nikrans LCD-500GW, Руководство по установке

Страница: 16 / 22

• Solution 1. Direct the outdoor antenna to provider’s nearest base station.
• Solution 2. Change the position of the outdoor antenna. Try to put it as high as possible.
• Solution 3. Reinstall the outdoor antenna trying to avoid obstacles between the antenna and provider’s base
station.
If the device detects that the outdoor antenna is too close to the indoor, change the position of either or both
antennas to avoid self-oscillation. Mount them at least 15m one from another.
If the device detects self-oscillation between the antennas and says that the system is being adjusted, it means that
the system has detected the problem of bad isolation between the antennas and AGC is adjusting the system gain
automatically to make the device work correctly. No actions are required from you.
If the system shows “Device was damaged” note, it means that the uplink/downlink was damaged. Contact customer
service for repair.
What signal level in dBm is optimal for the correct booster functioning?