Nikrans LCD-1200GW, Руководство по установке

Страница: 17 / 21

antennas or replace the repeater for another model with higher power level.
2. If the signals in small parts of the area have not been improved, please check the following:
- Check whether the indoor antenna is installed correctly or not; you may try to change the
antenna location to improve coverage.
- Check if it is necessary to adjust the direction of the indoor antenna.
- Check whether it is necessary to add one or more antennas to enhance the coverage in special
areas.
For maximum precision in signal level testing, switch your cell phone into Field Test Mode and see dB
parameter. The closer dB signal level to 0, the better cell phone reception you’ll get.
• -105 to -100 = Bad/drop call
• -99 to -90 = Getting bad/signal may break up
• -89 to -80 = OK/shouldn't have problems, but maybe
• -79 to -65 = Good
• Over -65 = Excellent
Your task is to get at least -79dB signal to ensure reliable communication and strong signal inside the
building.
Remark:
• Reduce attenuation values * — by ensuring the isolation level
• Increase output power * — recommended ways: to adjust outdoor antenna direction/location, or
replace it to an antenna with higher gain to increase input signal strength.
7.4.2 Repeater can not communicate in Power-ON status
1. The power is on but there is a signal fluctuation or a flash signal. The phone call cannot be made/
received.