Nikon T-RCP, Инструкция по эксплуатации, Страница: 39 / 79

III Additional Functions
4 Performing Parfocal Corrections
- 37 -
III
(3) Correcting Preset Focus Position
If changing specimens results in a change in focus positions, you can correct focus positions for all objectives with
a single operation. Simply adjust focus and set the correct position for the 10x objective; this will correct
differences in focus positions for all other objectives. Note that these focus position corrections do not apply to
objectives for which no focus positions have been set.
1
Press the MODE key, and the SETTING MENU screen will
appear on the LCD.
Select “More” using the
S
key or the
T
key and then
press the [ ] key.
ＳＥＴＴＩＮＧ ＭＥＮＵ
Ｏｂｊｅｃｔｉｖｅ
Ｃｏｎｄｅｎｓｅｒ
Ｆｉｌｔｅｒ
Ｅｘｃｉｔｅｒ
Ｂａｒｒｉｅｒ
Ｃｏｍｂｉｎａｔｉｏｎ（Ｏｂｊ．＞Ｃｏｎｄｅｎｓｅｒ）
Ｃｏｍｂｉｎａｔｉｏｎ（Ｆｉｌｔｅｒ＞ＥＸ／ＢＡ）
Ｍｏｒｅ
2
Select "Focus" using the
S
key or the
T
key and then
press the [ ] key.
ＭＯＲＥ
Ｒｏｔａｔｉｏｎ Ｓｔｏｐｐｅｒ
Ｆｏｃｕｓ
Ｏｔｈｅｒ Ｕｎｉｔ
Ｒｅｍｏｔｅ Ｃｏｎｔｒｏｌ Ｐａｄ
Ｓｈｕｔｔｅｒ Ｋｅｙ
Ｆｏｏｔ Ｓｗｉｔｃｈ
Ｃｏｍｍｕｎｉｃａｔｉｏｎ Ｄｅｌｉｍｉｔｅｒ
3
Place the 10x objective in the optical path using the
OBJECTIVE key, and focus on the specimen using the
coarse/fine focus knobs.
4
Select "SHIFT" for "FOCUS POSITION" using the
S
,
T
,
W
, or
X
key and then press the [ ] key.
This sets the focus position for the 10x objective.
The difference between the previous and new focus
positions is added to the focus positions of the other
objectives.
ＦＯＣＵＳ ＫＮＯＢ ＭＯＤＥ
［Ｃｏａｒｓｅ］
ＦＯＣＵＳ ＭＯＤＥ
［ＯＦＦ］
ＦＯＣＵＳ ＰＯＳＩＴＩＯＮ
ＳＥＴ ＳＨＩＦＴ ＣＬＥＡＲ
ＯＢＪＥＣＴＩＶＥ
Ｓｅｒｉｅｓ Ｍａｇ．
［Ｐ Ｆｌｕｏｒ ］［ＤＬ １０ｘ］
5
Press the MODE key to end the setting and to return to the
OPERATION screen.