Nikon P-FLA2, Инструкция по эксплуатации, Страница: 34 / 43

E-14
II
Assembly
WARNING
•
Before mounting the fluorescence attachment to
the stereoscopic microscope, read the chapter “Be
sure to always follow these guidelines” at the top of
this manual.
•
Read the instruction manual supplied with the
super high pressure mercury lamp power supply for
how to mount and use the light source. The wrong
use of the mercury lamp may lead to lamp burst,
leak of inner sealed gas or loss of eyesight due to
ultraviolet rays.
Requiered tools: Supplied attachment tool
×
1
Hexagonal wrench (M2)
×
1 (The clamp tool of the
stereoscopic microscope can be used.)
1
Assemble the stereoscopic microscope except the binocular
eyepiece tube.
(See the instruction manual supplied with the stereoscopic microscope for
details.)
2
Mount the fluorescence
attachment on the
zooming body of the
microscope.
Match the groove on the
bottom of the attachment
with the positioning pin on
the zooming body when
mounting the attachment on
the zooming body. Tighten
the clamp screw with the
hexagonal screwdriver to fix.
Positioning pin
Fluorescence attachment
Clamp screw